Hyundai's CVVD technology claims improved performance and lesser emission, to debut in new-gen Sonata
Hyundai has developed the world's first Continuously Variable Valve Duration (CVVD) technology that will be offered in the upcoming Hyundai and Kia cars. The company has debuted this tech in the new Smartstream G1.6 T-GDi engine. Hyundai states the CVVD tech optimizes both engine performance and fuel efficiency . The valve control technology regulates the duration of valve opening and closing according to driving conditions, achieving a 4 per cent boost in performance and a 5 per cent improvement in fuel efficiency. Furthermore, the technology cuts emissions by 12 per cent. This new tech will make a debut in the new-gen Sonata that will be launched globally by the end of this year.
Hyundai explains, until now, an internal combustion engine's performance and efficiency have been governed by variable valve control technology that adjusts the timing of valve opening and closing and depth of the valve's opening, with engine power produced through the fuel intake-compression-expansion-exhaustion cycle. Typical variable valve control technologies manage the timing of the valve's opening and closing (as in Continuously Variable Valve Timing - CVVT) or control the volume of air admitted by adjusting the depth of the opening (Continuously Variable Valve Lift - CVVL). Previous variable valve control technologies could not regulate valve duration, as the valve's closing timing was subordinate to opening timing and could not respond to diverse driving situations. CVVD takes the technology in a new direction by adjusting how long a valve is open.
When the vehicle is maintaining a constant speed and requires low engine output, CVVD opens the intake valve from the middle to end of the compression stroke. This helps to improve fuel efficiency by reducing the resistance caused by compression. On the other hand, when engine output is high, such as when the car is driving at a high speed, the intake valve is closed at the beginning of the compression stroke to maximize the amount of air used for the explosion, enhancing torque to improve acceleration.
Smartstream G1.6 T-GDi Engine
Unveiled alongside the new CVVD technology is the new Smartstream G1.6 T-GDi Engine, a four-cylinder gasoline turbo unit with 180 horsepower and 27.0kgm of torque. The new powertrain is the first to utilize the Group's new CVVD technology and also features Low-Pressure Exhaust Gas Recirculation (LP EGR) to further optimize fuel efficiency. The exhaust gas recirculation system returns some of the gas burnt by the engine to the combustion chamber, producing a cooling effect and reducing the emission of nitrogen oxides. The G1.6 T-GDi also features a low-pressure system that redirects the burnt emission gas to the front of the turbocharger compressor, rather than the intake system, to increase efficiency under the high load condition.
Additionally, the new unit has an Integrated Thermal Management System that quickly heats or cools the engine to an optimal temperature, and a strong direct spray system that achieves 350bar, surpassing the 250bar of the previous T-GDi engine. In addition, engine friction is reduced by 34 per cent with the application of low friction moving parts. The new Smartstream G1.6 T-GDi engine will be applied in the Hyundai Sonata Turbo, which is set for introduction in the second-half of this year. This premiere will mark the first in a series of new Hyundai and Kia vehicles featuring the engine. Information on first Kia vehicle to feature the engine will be revealed later on near the vehicle's launch date, mentioned Hyundai.